For decades there was one trustworthy way to keep information on a computer – employing a disk drive (HDD). Having said that, this sort of technology is by now showing its age – hard disk drives are actually noisy and slow; they can be power–ravenous and are likely to create quite a lot of warmth during serious operations.

SSD drives, alternatively, are fast, take in far less power and they are far less hot. They feature a brand new strategy to file access and data storage and are years in advance of HDDs with regard to file read/write speed, I/O performance as well as energy efficiency. Find out how HDDs stand up against the more recent SSD drives.

1. Access Time

Image

After the introduction of SSD drives, data accessibility speeds are now tremendous. On account of the new electronic interfaces utilized in SSD drives, the common data file access time has been reduced into a record low of 0.1millisecond.

Image

HDD drives rely on spinning disks for files storage reasons. When a file is being used, you have to wait around for the appropriate disk to get to the appropriate position for the laser beam to access the data file involved. This ends in an average access speed of 5 to 8 milliseconds.

2. Random I/O Performance

Image

Thanks to the exact same radical technique which enables for a lot faster access times, you may as well benefit from improved I/O effectiveness with SSD drives. They are able to conduct double as many procedures throughout a given time in comparison with an HDD drive.

An SSD can handle a minimum of 6000 IO’s per second.

Image

All through the very same lab tests, the HDD drives turned out to be considerably slower, with 400 IO operations managed per second. Even though this might appear to be a great number, if you have a hectic server that contains many famous web sites, a sluggish hard disk drive can result in slow–loading sites.

3. Reliability

Image

The lack of moving elements and rotating disks in SSD drives, and also the recent improvements in electronic interface technology have resulted in a substantially risk–free data storage device, having a typical failure rate of 0.5%.

Image

For the HDD drive to function, it has to spin a couple of metal disks at a minimum of 7200 rpm, retaining them magnetically stabilized in mid–air. They have a massive amount of moving parts, motors, magnets and other gadgets jammed in a tiny location. Consequently it’s no wonder that the standard rate of failure of an HDD drive ranges somewhere between 2% and 5%.

4. Energy Conservation

Image

SSD drives are far smaller than HDD drives and also they don’t possess virtually any moving components at all. It means that they don’t produce just as much heat and need a lot less electricity to work and fewer power for chilling purposes.

SSDs consume amongst 2 and 5 watts.

Image

HDD drives are infamous for becoming noisy; they’re prone to overheating and when you have several disk drives in a hosting server, you will need an extra a / c system simply for them.

In general, HDDs use up in between 6 and 15 watts.

5. CPU Power

Image

As a result of SSD drives’ higher I/O efficiency, the leading server CPU can easily work with data requests more quickly and save time for other procedures.

The standard I/O delay for SSD drives is 1%.

Image

When you use an HDD, you need to invest extra time waiting around for the outcomes of your file request. Consequently the CPU will be idle for further time, waiting for the HDD to reply.

The average I/O wait for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

It’s time for some real–world illustrations. We ran an entire system backup with a hosting server using only SSDs for file storage purposes. During that operation, the standard service time for an I/O demand kept beneath 20 ms.

Image

With the exact same web server, however this time built with HDDs, the outcome were totally different. The average service time for any I/O request fluctuated in between 400 and 500 ms.

7. Backup Rates

Image

A different real–life advancement is the rate at which the data backup was created. With SSDs, a server back up today can take less than 6 hours by making use of our hosting server–designed software solutions.

Image

Through the years, we have got utilized mainly HDD drives on our machines and we are familiar with their efficiency. On a hosting server built with HDD drives, an entire web server backup normally takes around 20 to 24 hours.

Our Linux VPS servers plus the typical hosting accounts have SSD drives automatically. Be a part of our bumble horse family, and discover the way we can help you boost your website.


  • Service guarantees

  •  
  • Each one of our Virtual Private Servers is put together for you free of cost. 99.9% network uptime. Full root server access.
  • Compare our prices

  •  
  • Review the resources and parameters coming with our Virtual Private Servers. You could start off with a smaller VPS configuration and upgrade with a click as your needs expand.
  • Compare our hosting plans
  • Contact Us

  •  
  • Get in touch with us 24x7 by email or by using bumble horse’s really–fast ticketing platform. Our technicians are prepared to reply to any queries within just 60 minutes.